Steps for Debugging a High-Quality Tattoo Machine Step 1: Hold the high-quality tattoo machine needle in your left hand, with your index finger against the bottom of the “mainframe” and the thumb pressed against the “needle fixing button”. Step 2: Connect the AC power and connect the cable to the high quality tattoo machine jack. Step 3: Press the “Adjustment Fixing Button” with your right thumb and forefinger to adjust to the “relaxed” state. Step 4: Hold the “pressure button” with your right thumb and forefinger, adjust the “pressure button” and use the right foot to step on the “foot switch” to start the high quality tattoo machine. Step 5: When adjusting the “pressure button” with your right thumb and forefinger, pay attention to the right hand and never leave or relax the “pressure button” until the high quality tattoo machine produces the best speed and sound. At the same time, touch the front end of the magnetic strip with the left thumb and the bottom of the needle bar. Whether the touch of the left thumb is the maximum vibration (to feel numbness, itching) At this time, the high-quality tattoo machine is in the best working condition. Step 6: When debugging a high-quality tattoo machine, we need to pay attention to the stroke of a high-quality tattoo machine. (The stroke means the distance between the magnetic strip of the high-quality tattoo machine and the magnetic coil.) The stroke must be at least 2.5MM. . This is to ensure that the needle has sufficient telescopic distance to ensure that the needle can be inserted into the bottom layer of the epidermis when it is extended, and that it can be retracted into the needle tube and stained with pigment. Step 7: When the high-quality tattoo machine is in the best condition, the right foot leaves the “foot switch” ie the power is cut off, the high-quality tattoo machine is in the stop state, and the “adjustment button” is adjusted with the right thumb and forefinger. To the tightest state, lock the “pressure button”.
Note: After completing the above seven steps, restart the high quality tattoo machine and test the machine! The best working condition! That is to complete the high quality tattoo machine debugging. High-quality tattoo machines use a professional regulator, the secant uses a voltage of 5-10V, and uses 5-12V for coloring or fogging.
