Tattoo power is a new generation of mini tattoo power supply. The size is only the size of the cigarette box, using a metal case. Beautiful appearance. Excellent workmanship, voltage setting
Accurate. The voltage below 18V can be adjusted freely. It is suitable for powering all kinds of tattoo machines. It is the ideal tattoo tool for tattoo artists.
2. Technical specifications
Model specifications: TPN-021A
Rated input voltage: 100-240Vac 50/60Hz
Input voltage range: 90-264Vac 50/60Hz
Input current: 0.5Amax
Output voltage: 0-18Vdc ±2% can be adjusted freely
Output current: 1.5A (max)
Shell material: metal aluminum
Dimensions: L10cm*W6.4cm*H2.4cm
Net weight: 150 grams
Structure diagram
1. AC power input socket
2. Power output jack OUTPUT
3. Foot switch FOOTSWITCH
4. Power output indicator
5. Output voltage regulation
Four. How to use
1. Power-on preparation: Plug one end of the randomly distributed AC cable into the power socket on the back of the TM011. As shown in the figure above, the position is inserted. The other end is plugged into the mains.
Socket, insert the foot switch into the jack at the position shown in the figure above. Insert the tattoo machine into the jack at the 2 position shown above.
2. Turn on the power: Step on the foot. The LED lights up. It indicates that the jack in the 2 position shown above has voltage output.
3. Set voltage: adjust the knob in the 5 position shown above. The output voltage can be set to the required value. After 5 minutes, the power will be automatically turned off.
Five. Notes
(1) Please use within the rated input and output range. When abnormal, please check if the input and output lines are connected properly.
(2) Do not stress when using. Do not fall. If the casing is deformed, please stop using it.
(3) High voltage danger. Do not disassemble the machine.
