Install tattoo machine:
1. After no-load debugging of the tattoo machine, I feel the sound and the intensity is ideal. First install the handle and tighten the screw slightly, and then install the tattoo needle.
2. Check whether the tattoo needle is in good condition. Insert the t-shaped rubber ring at the ring of the needle rod (randomly distributed), insert the tattoo needle from the upper end of the handle, and then put the rubber ring into the cylinder position of the square iron.
3. Install needle tube and adjust the position of handle.Hold the tattoo machine with your left hand, press the cylinder of the square iron with your thumb, and make the square iron touch the core surface of the coil. Adjust the handle with your right hand to expose the nozzle of the tattoo needle, which is 1-1.5mm long (about half the thickness of a one-yuan coin).
4 with "rubber band" (girls hair with soft rubber ring) in the needle rod ring bottom down about 8 mm to the needle rod and the fuselage waist binding, moderate tightness, to prevent the work of tattoo needle out, too tight will affect the rotation speed.So you can start working!
