Ordinary tattoo machine is not the same as the previous production. When the performance is just like touching the tattoo, the machine is divided into two machines. The secant can only cut the line, control the speed on the coil, and only fogging the fog. The two machines can't be replaced, even if the fog is made with the secant machine, the effect is not good, and it is very tired! The machine now produced, one machine and two machines can be used with each other. The ordinary tattoo machine can adjust the power supply to use the fog machine as a cutting machine, but for the novice, where can the power be adjusted? Use the secant machine as a fog machine! Viewpoint (personal habit), secant, speed is reduced, the needle is short, the needle is long (more than normal length), the ordinary tattoo machine is slowly secant for beginners, the reason, one ~ novice Slower speed is good for you. Second, it's easy to master. If you find the problem, you can change it in time!
Fog, the speed is adjusted back, the needle is also put back, the normal speed is fogging, and the operation is performed from the right side! The technique of fogging, the ordinary tattoo machine uses the soil method for the elderly who are tattooed: "Put the needle long, dip the color, and take the needle back. Fog the skin from the near point. Do not paint the pigment once. So far, the ordinary tattoo machine has made such a shallow fog. "When you start to learn tattoos, you can use your left arm as a practice board, and the empty needles will be fogged. You feel the depth of the needle. Practice more! Ordinary tattoo machine practice this when secant, single needle, no pigment, dilute salt water or saline in the pharmacy, secant on oneself, the cut line is red, it is clear If you find something wrong, you can draw some pictures on yourself.
