Why the tattoo machine doesn't work:
troubleshooting
1. The elastic rod does not touch the contact point of the oblique shrapnel. Loosen the screw of the elastic rod and make the elastic rod rotate downward to touch the contact point.
2, the power switch is not on, turn on the power, turn on the power switch, the indicator light is red
3. The VOLTAGE of the regulating button is at the zero position, and the VOLTAGE of the V meter is also at the zero position. The VOLTAGE of the regulating button rotates clockwise slowly, while the VOLTAGE of the V meter is also at the same time
In rotation, the V table pointer should stop at 6-10v.
4, the elastic rod touches the front shrapnel contact, the contact is too tight to start, more likely to produce a power short circuit, hit the power switch, the indicator light will be bright green no voltage will loosen the elastic rod screw, the elastic rod up loose from the shrapnel contact readjust the elastic rod to touch the contact, restart the power, adjust the elastic rod to the appropriate position.
5, stop while working: often in the work, accidentally do not know when to pull a pull on the power line, leaving the joint position.
Check foot switches and power cord plugs are in place
6. After the work is finished, when cleaning and sterilizing the tattoo machine, pull the line on the machine off (dislocation), check whether there is dislocation (broken) of the line head on the tattoo machine, and find an electrician to weld the line on
7, turn on the power on the indicator light bright green, check the plug on the power cord and foot switch on the plug, there is no broken, broken may touch the wire (short break), broken wire, to use a soldering iron welding, OK!
Is the tattoo machine good or bad to determine whether the tattoo work is easy?
-- -tattoo machines around the world, different styles, but the principle of work is the same.There is a world of difference in performance, needle frequency, needle wave
It is not the same, the length of working hours are not the same, consumable vulnerability is not the same.
-- -a good performance of the machine, it per second into the skin the number of times high (high needle frequency);The number of times that the depth of each puncture is kept at the same depth in each second is high (the needle wave is low);The second is the long hours.The third is whether the machine design is suitable for people's operation habits (whether there is scientific and rational).
